 |
(541) 474-2879
phone 10am-6pm Mo-Thu No Sales Tax |
|
||||
|
HOME
| YOUR
ORDER | EMAIL
US | ORDERING
INFO |
|
|
||
Wilson Electronics Cell Phone Amplifiers
The Wilson Mobile Wireless
Amplifier Kit with Phone Cradle includes everything you need to begin enjoying
improved cellular performance in mobile applications. We have found that this will greatly improve
your cell phone performance when you're off road in weak cellular signal areas.
If it can get a whiff of a cell tower signal it will lock on like a blood hound.
Using this kit will amplify the signals to and from the cell phone that you
place in its cradle, and will extend the range of other phones or cellular data
cards in the vehicle as well. Power is supplied to the unit via a cigarette/aux
power cord that can be hardwired if desired. The cradle has three different
mounting options. The kit includes the 12" magnet mount outside antenna which will collect the signal
from the cell tower and send it through the cable to the mobile wireless dual
band amplifier. The amplifiers state of the art technology is designed to
increase your signal up to 10 times, reduce disconnects and dropouts, and
increase data communication rates needed for 3G technologies. The amplified
signal is sent to the Cell Phone Cradle Plus which has the inside vehicle antenna built right in. Your cell phone or data
card then communicates with the improved signal. When the cell phone or data
card transmits, the signal goes through the cradle antenna, is then boosted by
the amplifier and broadcasts back to the cell tower through the outside antenna.
Most importantly, the Cradle Plus provides a convenient place to stow a phone
and allows the driver to keep both hands on the wheel while using the phone,
greatly increasing safety. Also great for safely holding your phone while you're
driving through rough terrain. Works really neat with your bluetooth earpiece, too.
This kit includes three mounting options for installing the cradle on the dash
or console of your vehicle. Wilson offers a 30 day guarantee and a 1 yr
warranty, see the link below for further info and installation instructions.
MADE IN THE USA
Wilson 30113 Mobile Cell Amplifier Kit:
330.00
Allows multiple phones and
data cards to be used simultaneously
Supports CDMA, TDMA, GSM and AMPS, in addition to 1x and 3x data protocols
such as HSDPA, EVDO and EDGE
Up to 3 watts maximum output power
Power control logic ensures maximum output power is within cellular
standards
Requires no physical connection to cell phone or data card
Provides high signal-to-noise ratio
Protects cell sites from harmful interference
Includes the amplifier, 12 exterior magnet mount antenna with 10'
cable and the Cradle Plus
Supplied with a cigarette/aux plug for power
Dual band - Cellular and PCS
FCC and IC type accepted
Part Number 801213
Frequency 824-894 MHz / 1850-1990 MHz
Gain 40 dB / 45 dB
Max Output Power 3 watts
Max RF +35 dBm / +10 dBm
Noise Figure 3 dB nominal
Flatness ± 3 dB / ± 4 dB
Isolation > 90 dB
Power Requirements 6 V, 3 A max
Connectors FME-Male 50 ohms
Amplifier Dimensions 4.5 x 3.5 x 1.25 (inches) or 11.43 x 8.9 x 3.2 (cm)
Weight 1.5 lbs / 0.7 kg
CLICK HERE FOR EASY INSTALL INSTRUCTIONS AND WARRANTY INFO
Wilson Electronics offers many choices of amplifiers and antennas including single band amps, direct connect systems, permanent mount antennas, etc.. Please let us know if you are interested in a Wilson product not shown here, we sell their entire line of products.
CLICK HERE TO VISIT THE WILSON ELECTRONICS WEBSITE
|