Wheeler's Off Road (541) 474-2879 phone
10am-6pm Mo-Thu
No Sales Tax
Wheeler's Off-Road Wheeler's Off-Road

VIAIR On-Board and Portable Air Compressors and Accessories

VIAIR 400C Compressor

VIAIR 400C Compressor: 199.00 Add This item to Your Cart 
This 12v compressor is designed to handle heavy duty mobile pneumatic applications. This compressor flows 1.62cfm at 60psi, 1.27cfm at 100psi and has a maximum working pressure of 150psi. The compressor has a maximum amperage draw of 30 amps and a 33% duty cycle rating. A 33% duty cycle means that if you constantly run the compressor for 15 min then it needs to rest for 30 min after that, to cool down. That is with the line pressure being 100psi and the intake air being at 72' F. Environmental conditions can increase or decrease duty cycle time. This compressor is suitable for direct inflation, air locker operation or use with an air tank. We recommend one of the heavy duty pressure switches shown below for this application. Overall measurements are  11.22"X7.05"X3.94" and weight is 8 lbs. 
-*-*-*-

VIAIR 450C Compressor:
246.00 Add This Item to Your Order 
Need a compressor like the 400C but need it to have a 100% duty cycle so that it can run constantly for extended lengths of time? The 450C has a 100% duty cycle, flows .97CFM @ 100PSI and measures 11.25"X4.00"X6.75"

____________________________________________

VIAIR 400P-A Compressor

VIAIR 400P-A Compressor: 262.00 Add This item to Your Order This portable 12v compressor is designed to handle heavy duty mobile pneumatic applications. This compressor flows 1.62cfm at 60psi, 1.27cfm at 100psi and has a maximum working pressure of 150psi. The compressor has a maximum amperage draw of 30 amps and a 33% duty cycle rating. This compressor is designed to be portable; it includes a gas station style Inflator/Deflator with quick disconnects and a large gauge, an 8ft power cord with battery clamps, a billet aluminum base plate, a 25' coiled hose and a deluxe heavy duty water resistant multi compartment carrying bag. The 400PA is an automatic version of the original 400P- it automatically shuts itself off when it obtains 150psi line pressure, and then turns on as needed during inflation. It's overall measurements are 11.22"X7.05"X3.94" and weight is 8 lbs.

____________________________________________

Installation Parts

Compressor Install Kit

VIAIR Onboard Air Hook Up Kit:
w/ 85-105psi switch:
75.00 Add This Item to Your Order

w/ 90-120psi switch: 75.00 Add This Item to Your Order

w/ 110-145psi switch: 75.00 Add This Item to Your Order
This kit comes with a  pressure switch, illuminated dash panel gauge with built in on/off switch, 20' of red (positive) extension wire, 20' of poly air line, a 1/4 female air line quick disconnect, and a bunch of brass fittings, misc hardware and connectors. This kit contains nearly every piece you will need to hook up to an air tank for convenient onboard air set up. (The only parts not included are the miscellaneous fittings for the tank itself which are available below in the "5 Piece Tank Port Fitting Kit") SAVE YOURSELF THE TROUBLE OF SHOPPING FOR THESE PIECES INDIVIDUALLY!

_____________________________________________

Pressure Switch

85psi on/105psi off Heavy Duty Pressure Switch:
20.00 Add This Item to Your Order
90psi on/120psi off Heavy Duty Pressure Switch:

20.00
Add This Item to Your Order
110psi on/150psi off Heavy Duty Pressure Switch:

20.00
Add This Item to Your Order
1/8"NPT to 1/4" NPT adapter:
1.60 Add This Item to Your Order
Turns the compressor on and off at indicated pressure levels. Built in relay for long service life. These moisture resistant switches are recommended for applications drawing 40 amps or less. Measures approx 4.25" x 2.25". Has a 1/8" NPT male fitting. We have 1/8"NPT  to 1/4"NPT adapters above if you need those.
________________________________________

Heavy Duty Onboard Air Tanks
These pressure rated tanks provides an instant high volume air charge for air locker setups, operating air tools, air horns, reseating tire beads as well as simple tire inflation. Several sizes are available to fit virtually any application:
.5gl Tank: 30.00 Add This Item to Your Order  VIAIR .5gl Tank 
Two 1/4" NPT Ports. 6" X 6.5" X 7". 150psi maximum working pressure


1gl Tank: 45.00 Add This Item to Your Order VIAIR 1gl Tank 
Four 1/4" NPT Ports. 10.25" X 6" X 7.5". 150psi maximum working pressure

  2.5gl Tank: 70.00 Add This Item to Your Order VIAIR 2.5gl Tank 
Six 1/4" NPT Ports. 23.5" X 6" x 7.5". 150psi maximum working pressure

2.5gl Tank (200psi): 75.60 Add This Item to Your Order VIAIR 2.5gl Tank, 200psi 
Six 1/4" NPT Ports 23.5" X 6" X7.5". 200psi maximum working pressure

 5gl Tank: 85.00 Add This Item to Your Order  
Two 1/4" NPT Ports, Two 3/8" NPT Ports. 20.5" X 9" X 10". 150psi maximum working pressure

________________________________________

VIAIR Fitting Kit

5 Piece Tank Port Fitting Kit: 10.00 Add This Item to Your Order This fitting kit is for use with most air tanks. You get two 1/4"npt plugs, one drain cock, one 1/4" compression fitting and one 175psi rated safety valve.
_________________________________________

VIAIR Fitting Kit

Air Locker Tank Fitting Kit: 10.00 Add This Item to Your Order This 5 piece air locker tank fitting kit is designed for air locker setup with an air tank. This kit contains one of each, 1/4" npt male to 1/8" BSP female adaptor, drain cock, 175psi safety valve, 1/4" compression fitting and a 1/4" plug. Use this kit to plumb the Viair compressors and an air tank if desired directly to the ARB factory supplied air locker hardware kit for greatly increased air flow and system versatility over the ARB compressor.
______________________________________

VIAIR Air Source Relocation Kit

Air Source Relocation Kit: 20.00 Add This Item to Your Order
This kit allows you to relocate your air source to a more convenient location. Kit contains one 1/4" female quick disconnect coupler and stud, two 1/4" compression fittings, 15ft of 1/4" air line tubing, three air line clips and a 4" strip of continuous grommet.
____________________________________

Accessories

VIAIR 25IL

25 IL Inline Deflator/Inflator: 30.00 Add This Item to Your Order
1. Rapid hands free air down. Simple push and turn action engages the deflation collar and locks for continuous deflation. Simple turning action disengages the deflation collar.
2. Fast and easy intermittent pressure release by simple pushing forward on the deflation collar.
3. Heavy duty 0-60psi gauge is built into the hose so there's no need to switch back and forth between hose and gauge while adjusting pressure.
4. 25ft length is adequate for most vehicles and comes with 1/4" quick disconnect stud and a bonus inflation tip kit is included to fill most camping and recreation equipment.
5. Included is a heavy duty zippered storage bag!

_____________________________________________

Trailhead Deflators

TRAILHEAD Automatic Tire Deflator Kit: 

5psi to 20psi Adjustable Set: 55.00 Add This Item to Your Order

15psi to 40psi Adjustable Set: 55.00 Add This Item to Your Order
TRAILHEAD Automatic Tire Deflators offer a quick and convenient way to air down. Simply screw them onto the tire stem and they do the rest. They automatically reduce the air pressure in a tire to a preset level and then stop, preventing any further loss of air from the tire. They will function properly whether your vehicle is stationary or traveling at speeds of 20 mph or less. The kit comes as pictured with 4 deflators. Click here to visit the TRAILHEAD website for more info. Made in the USA, Lifetime Warranty.
_____________________________________________

VIAIR Coiled Hose

35' Coil Hose w/ Chuck: 16.00 Add This Item to Your Order 
This 200psi rated 35' coil hose is excellent for airing up your tires as well as vehicles parked around yours. Now comes with a more convenient clip-on chuck instead of the ball chuck shown above, and a 1/4" male swivel for connection to your air system.

_____________________________________________

VIAIR 3 in 1 Gauge

VIAIR 3-in-1 Air Down Gauge: 17.00 Add This Item to Your Order This handy air down gauge combines 3 convenient functions in one versatile tool:
1. Rapid hands free continuous air down.
2. Intermittent deflation to fine tune pressure.
3. 2" Inline 0-60psi, 1lb increment gauge eliminates guesswork.
Gauge is protected by rubber bumper guard. Heavy duty zippered storage bag is included.

_____________________________________________

VIAIR Compressor Features:

• Oil-less design • Die-cast aluminum components • Steel mounting brackets with vibration isolators • Stainless steel valves • Aluminum Alloy Cylinder • Built-in check valve • Hi-Performance PTFE piston ring • Inlet unloader • Thermally protected motor • Dust and moisture resistant • Hi-Performance, gearless direct drive motor • heavy duty stainless steel braided hi-temp leader hose •

INTERESTED IN A C02 AIR SYSTEM? CLICK HERE CO2 Systems

We can supply the entire line of VIAIR equipment- let us know if there's something you need that is not listed here! They have more accessories, pre-packaged systems and smaller or bigger compressors- click here to visit their website.

RETURN TO TOYOTA INDEX

RETURN TO FORD INDEX

RETURN TO NISSAN INDEX

RETURN TO SUZUKI INDEX

HOME  |  YOUR ORDER |   ORDERING INFO
Wheeler's Off-Road, Inc
3033 Foothill Blvd, Bldg B  •  Grants Pass, OR
e-mail us  •   (541) 474-2879 phone  •  10am-6pm Mo-Thu