(541) 474-2879 phone 10am-6pm Mo-Thu No Sales Tax
	HOME | YOUR ORDER | EMAIL US | ORDERING INFO |

Wheeler's Heavy Duty Toyota Steel Wheels

These are heavy-duty 16" x 8"  black powder-coated steel wheels for Tundra vehicles. We carry these with a couple of different backspace settings; one that is good for stock tires and up to 11.5" wide called TYPE A (4.5" backspacing) and another that is good for stock size tires up to 12.5" wide called TYPE B (4" backspacing). TYPE B has less backspacing which causes the tire to stick out from the fender a little more than TYPE A, allowing more room between the tire and upper control arm for wider tires. These wheels clear the brake calipers which has been an issue with replacement wheels on these trucks. The wheels have larger bead retention grooves to assist bead retention at low tire operating pressures. These wheels are DOT approved. We have black and chrome lug nuts, lug locks and wheel caps listed below for these wheels. The 16"X8" wheels weigh approx 37lbs/ea.

16" WHEELS:

16X8 BLACK Toyota Steel Wheel: TYPE A: 78.00ea 
                                                   TYPE B: 78.00ea 
_______________________

LUG NUTS, HUB CAPS, LUG LOCKS, TOOLS, PROBLEM SOLVERS

BLACK Acorn Lug Nuts: 1.25ea A premium nut from Gorilla with their super tough black chrome finish. 12mmx1.5.
______________________________

 CHROME Acorn Lug Nuts: 1.00ea A premium nut from Gorilla with their super tough chrome finish. 12mmx1.5
______________________________

CHROME Lug Nuts for Factory Alloy Wheels (not pictured)
We've got these in a couple of different lengths to suit all factory wheel applications, simply measure the overall length of your lug nut to determine your needs. These are factory quality (or better) nuts from Gorilla with their super tough chrome finish. Factory flange style nut with integrated washer. These are for your factory alloy wheels only. 12mmx1.5 threads.
Factory Style Lug Nut, 1.5" Overall Length: 4.00ea  
Factory Style Lug Nut, 1.85" Overall Length: 4.00ea
______________________________

BLACK Acorn Lug Lock Set (4 locks w/ key): 15.95 Black Chrome Lug Lock Set, 12mmx1.5

______________________________

CHROME Acorn Lug Lock Set (4 locks w/ key): 15.95 Chrome Lug Lock Set, 12mmx1.5

CHROME Lug Lock Set for Factory Alloy Wheels (4 locks w/ key): 15.95   (not pictured). Flange style nut with integrated washer, these are for your factory alloy wheels only. 12mmx1.5
______________________________

Thin Wall 1/2" Drive 13/16" Socket: 5.95 A high quality thin wall socket, from Gorilla. 
______________________________

Power Wrench Socket Drive Handle/Lug Wrench: 14.95 Here's a cool tool- a heavy duty 1/2" drive lug wrench that is collapsible for storage and expandable for super leverage. Also works with deeper dish aftermarket wheels. Replace your whimpy factory lug wrench with this brute! Use with the 13/16" socket above, or any other 1/2" drive socket. 
________________________

HUB CAPS

BLACK Hub Cap, 2.75" Tall, Closed: 4.99/ea

BLACK Hub Cap, 2.75" Tall, Open for Manual Hub Access: 
4.99/ea

______________________________

CHROME Hub Cap, 2.75" Tall, Closed: 3.95/ea

CHROME Hub Cap, 2.75" Tall, Open for Manual Hubs: 3.95/ea

________________________  

WHEEL SPACERS

1/4" Thick Wheel Spacer: 5.00/ea
These 1/4" wheel spacers come in handy for fitting other brands of steel wheels that won't fit your Toyota because they contact the front brake calipers. A lot of folks will only install these on the front, the rear brakes usually don't have wheel clearance issues. Use your discretion on determining if these will safely allow enough thread contact on your wheel studs after installation.
 

HOME  |  YOUR ORDER |   ORDERING INFO Wheeler's Off-Road, Inc 3033 Foothill Blvd, Bldg B  •  Grants Pass, OR e-mail us  •   (541) 474-2879 phone  •  10am-6pm Mo-Thu