 |
(541) 474-2879
phone 10am-6pm Mo-Thu No Sales Tax |
|
||||
|
HOME
| YOUR
ORDER | EMAIL
US | ORDERING
INFO |
|
|
||
Wheeler's Heavy Duty Toyota Steel Wheels
These are heavy-duty 15" X 8", 15" X 10" and 16" x 8" black powder-coated and chrome plated steel wheels for 95-Current Tacoma 4x4 and PreRunner vehicles. We carry these with a couple of different backspace settings; one that is good for stock tires and up to 11.5" wide called TYPE A (4.5" backspacing) and another that is good for stock size tires up to 12.5" wide called TYPE B (4" backspacing). TYPE B has less backspacing which causes the tire to stick out from the fender a little more than TYPE A, allowing more room between the tire and upper control arm for wider tires. These wheels clear the brake calipers which has been an issue with replacement wheels on these trucks. The wheels have larger bead retention grooves to assist bead retention at low tire operating pressures. These wheels are DOT approved. We have black and chrome lug nuts, lug locks and wheel caps listed below for these wheels. The 15"X8" wheels weigh approx 30lbs/ea, the 15"X10" & 16"X8" wheels weigh approx 37lbs/ea. *NOTE: OUR 15" WHEELS ARE DESIGNED SO THEY WILL FIT ON A 95-04 16" FACTORY EQUIPPED TACOMA! NOW YOU CAN RUN 15" TIRES ON YOUR 16" EQUIPPED TACOMA. WE'VE HEARD OF A RARE FACTORY OPTION IN 2004 CALLED "VSC"- IF YOUR 2004 TACOMA HAS THIS OPTION YOU NEED TO STAY WITH 16" WHEELS OR BIGGER.
15" WHEELS:
15X8 BLACK Toyota
Steel Wheel:
TYPE A: 59.00ea 
TYPE B:
59.00ea
15X8 CHROME Toyota
Steel Wheel:
TYPE A: 55.00ea
15X10
BLACK Toyota
Steel Wheel: 63.00ea
NEW SIZE- THESE HAVE
3.75" BACKSPACING WITH OUR HIGH CLEARANCE CENTERS. THE BEST FITTING STEEL
10" FOR THE TACOMA IF YOU GOTTA HAVE 10's...
16" WHEELS:
16X8 BLACK Toyota
Steel Wheel:
TYPE A: 78.00ea
TYPE B: 78.00ea
16X8 CHROME Toyota
Steel Wheel:
TYPE A: 75.00ea
TYPE B: 75.00ea
LUG NUTS, HUB CAPS, LUG LOCKS, TOOLS, PROBLEM SOLVERS
BLACK Acorn Lug Nuts: 1.25ea
A premium nut from Gorilla with their super
tough black chrome finish. 12mmx1.5.
______________________________
CHROME Acorn Lug Nuts: 1.00ea
A premium nut from Gorilla with their super
tough chrome finish. 12mmx1.5
CHROME Lug
Nuts for Factory Alloy Wheels: 4.00ea
(not pictured). A premium nut from Gorilla
with their super tough chrome finish. Factory flange style nut with integrated
washer. These are for your factory alloy wheels only. 12mmx1.5
______________________________
BLACK Acorn Lug Lock Set (4
locks w/ key): 15.95
Black Chrome Lug Lock Set, 12mmx1.5
______________________________
CHROME Acorn Lug Lock Set (4
locks w/ key): 15.95
Chrome Lug Lock Set, 12mmx1.5
CHROME Lug Lock Set for
Factory Alloy Wheels (4 locks w/ key): 15.95
(not pictured). Flange style nut with integrated washer, these are for your
factory alloy wheels only. 12mmx1.5
______________________________
Thin Wall 1/2" Drive 13/16" Socket: 5.95
A high quality thin wall socket, from Gorilla.
______________________________
Power Wrench Socket Drive
Handle/Lug Wrench: 14.95
Here's a cool tool- a heavy duty 1/2"
drive lug wrench that is collapsible for storage and expandable for super
leverage. Also works with deeper dish aftermarket wheels. Replace your whimpy
factory lug wrench with this brute! Use with the 13/16" socket above, or
any other 1/2" drive socket.
________________________
HUB CAPS
BLACK Hub Cap, 2.75"
Tall, Closed: 4.99/ea
BLACK Hub Cap, 2.75"
Tall, Open for Manual Hub Access:
4.99/ea
______________________________
CHROME Hub Cap, 2.75"
Tall, Closed: 3.95/ea
CHROME Hub Cap, 2.75"
Tall, Open for Manual Hubs: 3.95/ea
________________________
WHEEL SPACERS
1/4" Thick Wheel Spacer: 5.00/ea
These 1/4" wheel spacers come in handy
for fitting other brands of steel wheels that won't fit your Toyota because they
contact the front brake calipers. A lot of folks will only install these on the
front, the rear brakes usually don't have wheel clearance issues. Use your
discretion on determining if these will safely allow enough thread contact on
your wheel studs after installation.
|