|
||||
| HOME
| YOUR
ORDER | EMAIL
US | ORDERING
INFO |
|
||||

AIR LIFT Air Spring Kits for Toyota Tacoma 4x4 and PreRunner
Many of our customers are looking for a solution to having improved towing or load stability but still maintain factory ride height and factory ride when unloaded. The Air Lift Air Spring Systems are the answer for these customers. They can simply be filled with compressed air to compensate for load and then air pressure can be reduced in the air spring when extra capacity is not needed. Also great for keeping your headlights level by eliminating sag while loaded. You can fill them by adding air from an air hose (just like filling a tire) or you can add an onboard compressor system and have control of them from the cab (shown below). We can provide the entire line of Airlift products at great prices, let us know if there's something you need not listed here.
95-04 Tacoma Air Spring Kit
#59537:
245.00
Includes two air springs, installation
hardware and air hose for manual fill. Fits 4x4 and PreRunner. Click here
for additional info about the Air Spring System. Click here
for install instructions.
05-Current Tacoma Air Spring
Kit #59561:
245.00
Includes two air springs, installation
hardware and air hose for manual fill. Fits 4x4 and PreRunner. Click here
for additional info about the Air Spring System. Click here
for install instructions.
Optional Onboard Compressor Systems for Air Spring Systems


Load Controller II Onboard Air System #25592:
185.00
Control your air spring pressure from your
cab. Levels Vehicle Side To Side. Comes With New Wiring Harness. Easier And
Faster Installation. Ready Air Supply. 5 psi Low Pressure Sensor. Economically
Priced. Two Year Limited Warranty. Click here
for installation instructions.

WirelessAir Onboard Air
System #72000:
475.00
Control your air springs
on the go with the convenience of Air Lift’s WirelessAIR, our premium wireless
on-board compressor system. About the size of a garage door opener, the wireless
controller conveniently clips to a vehicle's visor allows you to inflate or
deflate your air springs with a touch of a button—from inside or outside the
vehicle. Using the remote from outside the vehicle allows you to make
adjustments in full view of the vehicle.
• With the touch of a button, control the pressure in your air springs from
the cab of your vehicle. This is extremely convenient for changes in load or
road conditions. If you’ve just hooked up your RV, trailer or put a load in
the bed of your truck, you can inflate your air springs to the desired pressure
immediately. No more searching for a gas station compressor to find air!
• Exclusive two way communication provides advanced air system diagnostics
such as leak detection and compressor communication failure. The system adjusts
and automatically maintains set pressures.
• The system includes everything needed to install, including a heavy duty
compressor, manifold, wiring harness, and wireless digital controller.
• The manifold is weather resistant and waterproof up to 2 ft for maximum life
expectancy and protection from harsh vehicle environments and climates.
• WirelessAIR provides dual path airflow for your vehicle’s air springs.
This means your left and right air springs can be set to independent pressures.
This is particularly helpful if you have more weight on one side of the vehicle
than the other.
• 2 programmable pressure settings for the loads you tow or haul the most.
• As an added safety measure, WirelessAIR automatically senses low air spring
pressure and immediately activates to maintain a safe pressure level.
• All Air Lift compressor systems are compatible with any brand of air
springs.
• Includes a 2-year warranty.
Click here for installation instructions.

|