Wheeler's Off-Road, Inc

Wheeler's Heavy Duty Toyota Steel Wheels for 
FJ Cruiser


These are heavy-duty 16" x 8" powder-coated or chrome plated steel wheels for the FJ Cruiser. Powdercoat is available in black or white. We carry these with a couple of different backspace settings; TYPE A has 4.5" of backspacing and TYPE B has 4" of backspacing. The FJ factory wheels that we have measured have approx 4-5/8" of backspacing, for comparison. These wheels clear the brake calipers which has been an issue with replacement wheels on these trucks. The wheels have larger bead retention grooves to assist bead retention at low tire operating pressures. These wheels are DOT approved. We have black and chrome lug nuts, lug locks and wheel caps listed below for these wheels. These wheels weigh approx 37lbs/ea.

   

16X8 BLACK Toyota Steel Wheel: TYPE A: 71.00ea 
                                                   TYPE B: 71.00ea 

16X8 WHITE Toyota Steel Wheel: TYPE A: 71.00ea 
                                                   TYPE B: 71.00ea 

16X8 CHROME Toyota Steel Wheel: TYPE A: 93.00ea 
                                                      TYPE B: 93.00ea 

________________________

LUG NUTS, HUB CAPS, LUG LOCKS, TOOLS, PROBLEM SOLVERS


BLACK Acorn Lug Nuts:
1.25ea A premium nut from Gorilla with their super tough black chrome finish. 12mmx1.5.
______________________________


 CHROME Acorn Lug Nuts:
1.00ea A premium nut from Gorilla with their super tough chrome finish. 12mmx1.5
______________________________

 

BLACK Acorn Lug Lock Set (4 locks w/ key): 15.95 Black Chrome Lug Lock Set, 12mmx1.5
BLACK 5 Lock Set for FJ's: 17.50 Has An Extra Lock for the Spare Tire!
       
CHROME 5 Lock Set for FJ's: 17.50 Has An Extra Lock for the Spare Tire!

______________________________

CHROME Acorn Lug Lock Set (4 locks w/ key): 15.95 Chrome Lug Lock Set, 12mmx1.5
______________________________


Thin Wall 1/2" Drive 13/16" Socket:
5.95 A high quality thin wall socket, from Gorilla. 
______________________________

Power Wrench Socket Drive Handle/Lug Wrench: 12.00 Here's a cool tool- a heavy duty 1/2" drive lug wrench that is collapsible for storage and expandable for super leverage. Also works with deeper dish aftermarket wheels. Replace your whimpy factory lug wrench with this brute! Use with the 13/16" socket above, or any other 1/2" drive socket. 
________________________

HUB CAPS

BLACK Hub Cap, 2.75" Tall, Closed: 4.99/ea

BLACK Hub Cap, 2.75" Tall, Open for Manual Hub Access: 
4.99/ea

______________________________

CHROME Hub Cap, 2.75" Tall, Closed: 3.95/ea

CHROME Hub Cap, 2.75" Tall, Open for Manual Hubs: 3.95/ea

________________________  

WHEEL SPACERS


1/4" Thick Wheel Spacer: 5.00/ea
These 1/4" wheel spacers come in handy for fitting other brands of steel wheels that won't fit your Toyota because they contact the front brake calipers. A lot of folks will only install these on the front, the rear brakes usually don't have wheel clearance issues. Use your discretion on determining if these will safely allow enough thread contact on your wheel studs after installation.
________________________

RETURN TO ORDER FORM

RETURN TO INDEX

ORDERING INFO

Wheeler's Off-Road, Inc
3033 Foothill Blvd, Bldg B
Grants Pass, OR

e-mail: sales@wheelersoffroad.com
(541) 474-2879 phone
10am-6pm Mo-Thu