(541) 474-2879 phone 10am-6pm Mo-Thu No Sales Tax
	HOME | YOUR ORDER | EMAIL US | ORDERING INFO |

- Miscellaneous Suspension Parts for 99-06 Tundra -
Spacers, Extended Top Plate Studs, Diff Drop Kits, Longer Rear Brake Lines..

FRONT

1/4" Thick Aluminum Top Spacer Pair: 41.96 A machined aluminum spacer pair, 1/4" thick. For your front suspension. Stackable. Fits on top of the upper strut plate. Single 1/4" spacers do not require longer studs. Provides approx 3/8" lift.
Single 1/4" Spacer: 20.98  

3/8" Thick Steel Top Spacer Pair: 63.00 A chrome plated steel spacer pair, 3/8" thick. For your front suspension. Stackable. Fits on top of the upper strut plate. Requires longer stud set shown below. Provides approx 1/2"-5/8" lift.
Single 3/8" Spacer: 31.50

1" Thick Poly Top Spacer Pair: 24.95 A polyurethane spacer pair for your front suspension. Goes on top of your strut plate. Provides approx 1.25"-1.5" lift. Requires longer stud set shown below.

3/4" Thick Preload Spacer: 39.95 A polyurethane spacer pair for your front suspension that replaces your factory coil isolator and provides approx 1"-1.25" lift. Does not requires longer studs.

FAQ: "CAN I STACK THESE OR COMBINE WITH MY EXISTING LIFT TO GET OVER 2.5" OF FRONT END LIFT?" UNFORTUNATELY NO, YOU SHOULD NOT EXCEED 2.5" FRONT LIFT WITH THESE TYPE LIFTS ON YOUR TUNDRA, REGARDLESS OF WHAT COMBINATION YOU USE TO GET THERE. 

Extended Top Plate Stud Set: 15.00 6 top plate studs with nylock nuts, factory metric thread size but longer to fit spacers. Accommodates up to 1.25" of top spacer. Tap out your factory studs with a hammer, tap these in.

Factory Length Top Plate Stud Set: 12.00 6 genuine factory length top plate studs, use your factory nuts. Not normally available separate of the expensive factory top plates!

Rubber Front Coil Isolator Pair: 22.00 We ran out of our stash of new factory rubber coil isolators but we've located some aftermarket ones that are good quality and identical to factory.

Front Differential Drop Kit: 24.00 Helps alleviate some of the cv angle on your front axles when lifting your vehicle. 

REAR
Rear Brake Proportioning Valve Relocate Kit: 15.00  
A simple bracket and bolt kit that allows you to relocate your brake proportioning valve arm for rear brake pressure corrections on lifted Tundra's. 

U-Bolt Set for Leaf Springs: 29.95 Includes (4) 7.75" U-bolts. Good for most springs or AAL additions. Inquire if you need longer bolts, we got 'em..

Stainless Extended Rear Brake Hose: 37.00 2.5"-3" longer than stock, a stainless braided line with red pvc protective oversleeving.