(541) 474-2879 phone 10am-6pm Mo-Thu No Sales Tax
	HOME | YOUR ORDER | EMAIL US | ORDERING INFO |

Wheeler's Heavy Duty Steel Wheels for 96-current 4Runner

These are heavy-duty *15" X 8" and 16" x 8"  black powder-coated and chrome plated steel wheels for Toyota 4Runner. We specialize in the 96-current 4Runners but these certainly will fit earlier 4Runners as well. We carry these with a couple of different backspace settings; one that is good for stock tires up to 11.5" wide called TYPE A (4.5" backspacing, best fit for most 4Runners) and another that is good for stock size tires up to 12.5" wide called TYPE B (4" backspacing). TYPE B has less backspacing which causes the tire to stick out from the fender a little more than TYPE A, allowing more room between the tire and upper control arm for wider tires. These wheels clear the brake calipers which has been an issue with replacement wheels on these trucks (these do not fit the '03 and newer 4Runner with the Sport Package). The wheels have larger bead retention grooves to assist bead retention at low tire operating pressures. These wheels are DOT approved. We have black and chrome lug nuts, lug locks and wheel caps listed below for these wheels. The 15" wheels weigh approx 30lbs/ea, the 16" wheels weigh approx 37lbs/ea. *The 15" wheels are for 95-02 4Runner's that do not have the larger front brake package associated with 16" factory equipped wheel packages. One way to determine which brake package your 96-02 4Runner came with is to measure the diameter of the front brake rotors; the standard brake package uses rotors that are approx 11-5/8" in diameter and the optional brake package usually related to the 16" factory wheel package and/or the SR5 or Limited Package (but not always!..) has a diameter of approx 12.5". It should also show factory tire size on your driver door jam sticker.

15"

15X8 BLACK Toyota Steel Wheel: TYPE A: 59.00ea
                                                  TYPE B:  59.00ea

15X8 CHROME Toyota Steel Wheel: TYPE A: 55.00ea
                                                     

16"

16X8 Wheeler's BLACK Toyota Steel Wheel: TYPE A: 78.00ea 
                                                                 TYPE B: 78.00ea 

16X8 Wheeler's CHROME Toyota Steel Wheel: TYPE A: 75.00ea 
                                                                    TYPE B: 75.00ea 

________________________

LUG NUTS, HUB CAPS, LUG LOCKS, TOOLS, PROBLEM SOLVERS

BLACK Acorn Lug Nuts: 1.25ea A premium nut from Gorilla with their super tough black chrome finish. 12mmx1.5.
______________________________

 CHROME Acorn Lug Nuts: 1.00ea A premium nut from Gorilla with their super tough chrome finish. 12mmx1.5

CHROME Lug Nuts for Factory Alloy Wheels: 4.00ea (not pictured). A premium nut from Gorilla with their super tough chrome finish. Factory flange style nut with integrated washer. These are for your factory alloy wheels only. 12mmx1.5
______________________________

BLACK Acorn Lug Lock Set (4 locks w/ key): 15.95 Black Chrome Lug Lock Set, 12mmx1.5

______________________________

CHROME Acorn Lug Lock Set (4 locks w/ key): 15.95 Chrome Lug Lock Set, 12mmx1.5

CHROME Lug Lock Set for Factory Alloy Wheels (4 locks w/ key): 15.95   (not pictured). Flange style nut with integrated washer, these are for your factory alloy wheels only. 12mmx1.5
______________________________

Thin Wall 1/2" Drive 13/16" Socket: 5.95 A high quality thin wall socket, from Gorilla. 
______________________________

Power Wrench Socket Drive Handle/Lug Wrench: 14.95 Here's a cool tool- a heavy duty 1/2" drive lug wrench that is collapsible for storage and expandable for super leverage. Also works with deeper dish aftermarket wheels. Replace your whimpy factory lug wrench with this brute! Use with the 13/16" socket above, or any other 1/2" drive socket. 
________________________

HUB CAPS

BLACK Hub Cap, 2.75" Tall, Closed: 4.99/ea

BLACK Hub Cap, 2.75" Tall, Open for Manual Hub Access: 
4.99/ea

______________________________

CHROME Hub Cap, 2.75" Tall, Closed: 3.95/ea

CHROME Hub Cap, 2.75" Tall, Open for Manual Hubs: 3.95/ea

________________________  

WHEEL SPACERS

1/4" Thick Wheel Spacer: 5.00/ea
These 1/4" wheel spacers come in handy for fitting other brands of steel wheels that won't fit your Toyota because they contact the front brake calipers. A lot of folks will only install these on the front, the rear brakes usually don't have wheel clearance issues. Use your discretion on determining if these will safely allow enough thread contact on your wheel studs after installation.