|
||||
| HOME
| YOUR
ORDER | EMAIL
US | ORDERING
INFO |
|
||||
TOTAL CHAOS Uni-Ball Upper Control Arms and Accessories for 05-Current Toyota Tacoma 4x4 and PreRunner
NO SALES TAX

Total Chaos Uni-Ball Upper
Control Arm Set for 05-Current Tacoma:
669.00/pair
![]()
TC offers a replacement Upper Control
Arm system for your 2005+ Tacoma pickup that upgrades the factory ball joint to
a 1" Uniball and maintains a 100% bolt on application. When aftermarket
lifts are installed on these model vehicles the OEM suspension looses caster. By
altering the factory caster, the vehicle will lose on road handling &
performance and has a tendency to wander when driving down the road. TC
developed the UCAs to add 4 degrees caster to the suspension when aftermarket
coil over shocks and other lifts are installed. This will increases overall
handling and aids in the alignment of the vehicle. Built using all chromoly
tubing and 1" Teflon lined Uniballs, these stock length upper control arms
simply bolt to the existing factory a-arm location and pivot on urethane
bushings. TC has manufactured a press in spindle adapter and uses a 9/16"
grade 8 bolt. This complete kit includes heat treated hi-misalignment spacers
and zinc plated end washers. Zerk fittings are included in all pivots and the
kit comes complete with hardware, urethane bushings, inner sleeves and install
instructions. The
arms are rebuildable, bushing kits and uniballs are available below. Note
that the HD Uni-Balls in these arms can make a little noise occasionally, see
below for Tri-Flow lubricant.
Total Chaos UCA Bushing Kit:
50.00
Includes 8 poly bushings, to
service a pair of arms. No Uni-Balls included, see below.
Replacement Uni-Ball
Set for Total Chaos UCA: 120.00
Includes two Aurora brand Uni-Balls,
will service a pair of UCA's.
Tri-Flow® Superior Dry Lubricant:
5.89 ![]()
Tri-Flow® Superior Dry Lubricant is an elite formula created for dry
and dusty conditions. The 2oz drip bottle applicator
allows for deep penetration in hard to reach moving parts. Featuring paraffin
wax and high-grade petroleum oil to allow the lube to go on wet, but then set up
in a dry, 'wax-like' film so it will not attract or absorb grit and grime.
Perfect for dry, dirty, dusty conditions, while still providing adequate wet
weather performance. Holds up to extreme pressures and resists water wash-off.
Provides incredible efficiency without attracting an excessive amount of
contaminants. Great for Uni-Ball bearings.
_________________________________________________

Total Chaos Bolt-On Lower Control Arm Skid
Plates for 05-Current Tacoma: 122.50/pair
![]()
TC now offers armor for your stock Tacoma
suspension. This bolt on lower a-arm skid plate uses 3/16” mild steel to
provide maximum protection from the elements and will protect areas most
vulnerable to rocks and tree hang ups on the trail. TC’s armor is CNC laser
cut, pre bent and welded for easy installation. The skids bolt into existing
factory lower control arm bolt holes (enlarging some holes may be necessary).
Carriage bolts are used to eliminate damage caused by rocks. These arms ship raw
so the armor can also be fully welded to the stock lower control arm for added
strength & protection, if desired.
|