|
||||
| HOME
| YOUR
ORDER | EMAIL
US | ORDERING
INFO |
|
||||
Bilstein 5100 Height Adjustable Front Shocks and Rear Shocks for 05-Current Toyota Tacoma 4x4 and PreRunner Vehicles

FRONT SHOCKS

0-2.5" Lift
Adjustable Front Shock Set:
170.00/pair
These high performance Bilstein front struts have 4 spring seat
positions you can choose that provide approximately 0-2.5" of lift in
increments. They work with your factory coils. We have some customers run them
with Old Man Emu Coils as well. Good for lifting, leveling or compensating for winches, snowplows,
etc. Performance valved to provide better handling. Use with or without the rear
shock set shown below. We can assemble coils on these for you, inquire if
you need a cost on that. The struts don't come with new stem cushions or
washers; you can re-use your existing cushions and washers or get new ones
below.

Strut Stem Cushion and
Washer Kit: 20.00
![]()
Includes rubber stem
cushions and washers for two front struts.
REAR SHOCKS

C476/C478 5100 Rear Shock Set:
158.00/pair
Zinc coated high performance Bilstein 5100 rear shocks. Performance valved to provide better handling. Use with or without the front shock set shown above. These measure 14.02" x 22.94".
B110 5100 Rear Shock Set:
158.00/pair
Customer's are asking for these B110 shocks so we're listing them.
These are the Bilstein 5100 rear shocks from the RCD 4"-5" Tacoma Lift
System. They measure 16.34" X 27.28". RCD pairs these with a 4"
rear block. *NOTE FOR TRUCKS NOT RUNNING 4" REAR LIFTS WITH THESE SHOCKS: Compression bump stop on rear chassis may need to be modified to prevent damage to the shock absorber.
No warranty provided on shock failures caused by bottoming of the shock. May also require longer rear brake lines or modification to the brake line brackets.
H734 5160 Remote
Reservoir Rear Shock
Set: 399.00/pair
Zinc coated high performance remote
reservoir Bilstein 5160 rear shocks. Comes with reservoir mounts. Performance valved
to provide better handling. These measure 13.84"x23.23".
|