(541) 474-2879 phone 10am-6pm Mo-Thu No Sales Tax
	HOME | YOUR ORDER | EMAIL US | ORDERING INFO |

TOTAL CHAOS Uni-Ball Upper Control Arms and Accessories for 03-Current Toyota 4Runner
NO SALES TAX

Total Chaos Uni-Ball Upper Control Arm Set for 03-Current 4Runner:
669.00/pair
TC offers a replacement Upper Control Arm system for your 2003+ 4Runner that upgrades the factory ball joint to a 1" Uniball and maintains a 100% bolt on application. TC developed the UCAs to add 4 degrees caster to the suspension when aftermarket coil over shocks and other lifts are installed. This will increases overall handling and aids in the alignment of the vehicle. Built using all chromoly tubing and 1" Teflon lined Uniballs, these stock length upper control arms simply bolt to the existing factory a-arm location and pivot on urethane bushings. TC has manufactured a press in spindle adapter and uses a 9/16" grade 8 bolt. This complete kit includes heat treated hi-misalignment spacers and zinc plated end washers. Zerk fittings are included in all pivots and the kit comes complete with hardware, urethane bushings, inner sleeves and install instructions. The arms are rebuildable, bushing kits and uniballs are available below. Note that the HD Uni-Balls in these arms can make a little noise occasionally, see below for Tri-Flow lubricant.

Total Chaos UCA Bushing Kit: 50.00 Includes 8 poly bushings, to service a pair of arms. No Uni-Balls included, see below.

 Replacement Uni-Ball Set for Total Chaos UCA: 120.00 Includes two Aurora brand Uni-Balls, will service a pair of UCA's.

  Tri-Flow^® Superior Dry Lubricant: 5.89  
Tri-Flow^® Superior Dry Lubricant is an elite formula created for dry and dusty conditions. The 2oz drip bottle applicator allows for deep penetration in hard to reach moving parts. Featuring paraffin wax and high-grade petroleum oil to allow the lube to go on wet, but then set up in a dry, 'wax-like' film so it will not attract or absorb grit and grime. Perfect for dry, dirty, dusty conditions, while still providing adequate wet weather performance. Holds up to extreme pressures and resists water wash-off. Provides incredible efficiency without attracting an excessive amount of contaminants. Great for Uni-Ball bearings.
_________________________________________________

Total Chaos Bolt-On Lower Control Arm Skid Plates for 03-Current 4Runner: 122.50/pair
TC now offers armor for your stock 4Runner suspension. This bolt on lower a-arm skid plate uses 3/16” mild steel to provide maximum protection from the elements and will protect areas most vulnerable to rocks and tree hang ups on the trail. TC’s armor is CNC laser cut, pre bent and welded for easy installation. The skids bolt into existing factory lower control arm bolt holes (enlarging some holes may be necessary). Carriage bolts are used to eliminate damage caused by rocks. These arms ship raw so the armor can also be fully welded to the stock lower control arm for added strength & protection, if desired.