|
||||
| HOME
| YOUR
ORDER | EMAIL
US | ORDERING
INFO |
|
||||
- Miscellaneous Suspension
Parts for 03+ 4Runner -
Spacers, Extended Top Plate Studs, Diff Drop Kits..
1/4" Thick Aluminum Top
Spacer Pair: 41.96
A
machined aluminum spacer pair, 1/4" thick. For your front suspension.
Stackable. Fits on top of the upper strut plate. Single 1/4" spacers will
fit without longer studs. Provides approx 3/8" lift.
Single 1/4" Spacer: 20.98
3/8" Thick Steel Top
Spacer Pair: 63.00
A
chrome plated steel spacer pair, 3/8" thick. For your front suspension.
Stackable. Fits on top of the upper strut plate. Requires longer stud set shown
below. Provides approx 1/2"-5/8" lift.
Single 3/8" Spacer: 31.50
1/2" Thick Aluminum Top
Spacer Pair: 52.00
A machined aluminum spacer pair,
1/2" thick. For your front suspension. Stackable. Fits on top of the upper
strut plate. Requires longer stud set shown below. Provides approx
3/4"-7/8" lift.
Single 1/2" Spacer: 26.00
1-1/8" Thick Poly Top
Spacer Pair: 24.95
A
polyurethane spacer pair for your front suspension. Goes on top of your strut
plate. Provides approx 1.25"-1.5" lift. Requires longer stud set shown
below.
3/4" Thick Preload
Spacer: 39.95
A
polyurethane spacer pair for your front suspension that replaces your factory
coil isolator and provides approx 1"-1.25" lift. Does not requires
longer studs.
Extended Top Plate Stud Set: 15.00
6
top plate studs with nylock nuts, factory metric thread size but longer to fit
spacers. Accommodates up to 1.25" of top spacer. Tap out your factory studs
with a hammer, tap these in.
Factory Length Top Plate Stud Set: 12.00
6
factory stock length
top plate studs.
Front Differential Drop Kit: 24.00
Helps
alleviate some of the cv angle on your front axles when lifting your
vehicle.
FAQ: "CAN I STACK THESE OR COMBINE WITH MY EXISTING LIFT TO GET OVER 3" OF FRONT END LIFT?" UNFORTUNATELY NO, YOU SHOULD NOT EXCEED 3" FRONT LIFT WITH THESE TYPE LIFTS ON YOUR 03+ 4RUNNER, REGARDLESS OF WHAT COMBINATION YOU USE TO GET THERE.
|